Visit our new all-inclusive e-commerce store

ReliabilityDirectStore

All of the great products found here plus:

Bearing Maintenance Tools

Lubrication Equipment

Intrinsically Safe Products

and much more!

Your source for Extech test and measurement instrumentation

Copyright 1999-2007

Reliability Direct, Inc.

All Rights Reserved

Ultrasonic Wall and Coating Thickness Gauges

Standard Wall Thickness Gauges

Standard Coating Thickness Gauges

Data Logging Wall Thickness Gauges

Data Logging Coating Thickness Gauges

Multi-Function Wall Thickness Gauge

Ultrasonic Coating Thickness Gauge Accessories

Wall Thickness Gauge Accessories

Standard Ultrasonic Wall Thickness Gauges

Reliability Direct TM8812 Low Cost Ultrasonic Thickness Gauge

General purpose gauge measures wall thickness and the extent of corrosion of all metals - only $499.00!

EHC-09 Series Ultrasonic Wall Thickness Gauges

Available in multiple models from the field upgradeable basic durable thickness gauge to the B-Scan logging unit with through paint Echo-to-Echo

TI-25LT Economical Ultrasonic Wall Thickness Gauge

Factory set to measure steel only. Can be set to measure any single material.

TI-45N Low Ultrasonic Cost Wall Thickness Gauge

Measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics.

TI-25 Series Ultrasonic Wall Thickness Gauges

Accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics. Can be used in a Single Thickness Reading mode or in a Scan mode.

Models Include: General Purpose, Standard Through Paint to 1", High Temperature, Cast Iron / Plastics, Engine Blocks, Cylinder Wall / Engine Block, Heavy Wall

TI-007 Series Precision Ultrasonic Wall Thickness Gauges

Measuring Range from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Also available for use on plastics.

TI-MVX A/B Scanning Ultrasonic Wall Thickness Gauge

Measuring Range from 0.025 to 19.999 inch, (0.6to 254.00 mm).

Datalogging

TI-PVX Precision A/B Scanning Ultrasonic Wall Thickness Gauge

Resolution of 0.0001" (.001 mm)

Datalogging

T-Mike E Basic Ultrasonic Thickness Gauge

Measuring range of 0.025 inch to 19.999 inch. Wide range of transducers available.

T-Mike ES Auto-Scanning Ultrasonic Thickness Gauge

High speed scanning for minimum thickness capture, adjustable alarm and a difference function. Data Send enables continuous or command sending of thickness readings to printers and PCs.

T-Mike EM+ Ultrasonic Wall Thickness Gauges - Through Paint Mode

Stable readings are achieved in carbon steel from .025" to 20" thick.

Data Logging Ultrasonic Wall Thickness Gauges

EHC-09L Ultrasonic Wall Thickness Gauges

Data logging thru paint and coating thickness gauge

TI-25DL Series Ultrasonic Wall Thickness Gauges

Built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer.

TI-007DL Series Ultrasonic Wall Thickness Gauges

Measuring Range from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm).

Also available for use with plastics.

T-Mike EL Ultrasonic Wall Thickness Gage

On-board datalogger capable of storing over 40,000 readings in user definable data files. Readings can be sent directly to a printer or downloaded to a PC with the supplied software.

Multi-Function Ultrasonic Wall Thickness Data Logging Gauge

TI-HP1 High Performance Multi-Function Data Logging Gauge

Measures the most difficult materials, such as rubber in standard and through-paint modes. Features datalogging with included software.

Note: This Gauge has been discontinued and replaced by the TI-MVX Gauge

Ultrasonic Wall Thickness Gauge Accessories

Standard Ultrasonic Coating Thickness Gauges

DCF-900/DCN-900 Low Cost Ultrasonic Coating Thickness Gauges

Measures the thickness of paint, plating, coatings and galvanizing on iron, steel and non-ferrous metals.

DCF-3000, DCFN-32000, Ultrasonic Coating Thickness Gauges

Accurately measure the thickness of paint, plating, galvanize and other coatings on all metal surfaces.

3000PRO Series Series Ultrasonic Coating Thickness Gauges

Precise coating thickness measurement for paint and electroplated coatings on iron and steel, non-ferrous metals and on austenitic stainless steels.

Data Logging Ultrasonic Coating Thickness Gauges

3000PRO Series Series Ultrasonic Coating Thickness Gauges

Precise coating thickness measurement for paint and electroplated coatings on iron and steel, non-ferrous metals and on austenitic stainless steels.

Ultrasonic Coating Thickness Gauge Accessories