Visit our new all-inclusive e-commerce store

ReliabilityDirectStore

All of the great products found here plus:

Bearing Maintenance Tools

Lubrication Equipment

Intrinsically Safe Products

and much more!

Your source for Extech test and measurement instrumentation

Copyright 1999-2007

Reliability Direct, Inc.

All Rights Reserved

StressTel T-Mike ES Ultrasonic Thickness Gauge

The StressTel T-Mike ES is a compact, easy-to-use, and rugged thickness gauge. The T-Mike ES features high speed scanning for minimum thickness capture; an adjustable alarm illuminates LEDs to alert the operator when thickness values are above or below a set value; and a difference function displays the positive or negative difference between the thickness measurement and preset value. Data Send enables continuous or command sending of thickness readings to printers and PCs.

Features:

• Adustable calibration

• SCAN mode for rapid testing

• Minimum thickness display

• ALARM mode for comparison to nominal thickness

• RS-232 Data Port

• Sealed case

• Amber colored display

• 300 hours battery life with (4) alkaline or NiCad "AA" batteries 

• Two year warranty

Kit includes: 

• T-Mike E Ultrasonic Thickness Gauge

• Operating Manual

• 1/4" x 5 MHz Transducer 

• Couplant

• Battery charger (if NiCad batteries)

• 4 "AA" Batteries (Alkaline or NiCad)

• Instrument Accessory Case

• Certificate of Calibration

Buy Now

Part #

Description

Price

STR-T-Mike ES

Thickness Gage

$1,965.00

POWER SUPPLY

Battery:

4 Alkaline (standard) or NiCad Batteries

Operating Time:

300 hours typical operation from four AA-size alkaline batteries (80 Hours with Backlight)

OPERATION

Gaging Range:

0.040 - 19.999" (0.635 - 500 mm) depending upon material, temperature and probe

Gaging Resolution:

+/-0.001" (0.01 mm)

Material Velocity Range:

From less than 0.9999" / microsecond

( 9.999mm / microsecond)

Allowable Surface Temperature Range:

0 to 300° F (-18 to 150° C) High Temperature probes available

DISPLAY

Measurements:

41/2 digit backlit LCD readout, 1/2" high digits

SCAN Mode:

Allows you to scan area and display minimum thickness found

Alarm:

Red LED lights when reading falls below set target range. Green LED lights to indicate OK reading

Diff Function:

Indicates (+) or (-) of a set thickness value

Send:

RS-232 port for transmitting current thickness value

Low Batter Indicator:

Display flashes on and off

Unit systems:

English or Metric selectable

Color:

Amber backlit color, easy to see and low eye strain

TRANSDUCER

Description:

5 mHz, 0.25" diameter standard included

Connection:

Lemo quick disconect

Configuration:

Dual Element ultrasonic probe

Cable:

4 foot, environment protected

PHYSICAL

Instrument Case:

Environmentally sealed Aluminum Case

Size (H x W x D):

4.5" x 2.5" x 1.25" (114 x 64 x 33 mm)

Weight:

11 Ounces (312 grams)