The StressTel T-Mike EM+ thickness gauge. Innovative packaging and
increased performance without sacrificing simplicity. The T-Mike EM+
gauges are packaged in an environmentally sealed armored case
ergonomically designed for single hand operation.
Automatic Probe Zero with no probe zero block and Automatic Gain Control
further support StressTel's goal of providing very capable yet simple to
use instruments. The ultrasonic performance of the T-Mike EM+ is unrivaled
by its competitors - stable readings are achieved in carbon steel from
.025" to 20" thick. And YES the T-Mike EM+ has THRU PAINT Mode using the
latest multi-echo measurement techniques to allow the operator to obtain
accurate wall thickness readings without scraping paint.
Features:
1. Power Key
2. Increase value within CAL or SETUP
3. Decrease value within CAL or SETUP
4. SETUP key to change operating modes
5. Initiates CAL function and changes SETUP Modes
6. Set backlight to AUTO or OFF
7. Initiates Min Capture Scan Mode
8. Toggles between THRU PAINT and normal IP Mode*
9. Coupling Indicator
10. 2-Point CAL Mode indicator
11. Velocity CAL Mode indicator
12. THRU PAINT Mode indicator*
13. Probe Recognition indicator
14. CAL Mode indicator
15. Metric or Imperial Units
16. Alarm Indicator
17. Battery Indicator
18. SCAN Mode Indicator
Kit Includes:
T-Mike EM+ Instrument
Two 1.5V AA Alkaline Batteries
Hard Shell Carry Case
063-200-098 Transducer Couplant
Operating Manual
Certificate of Calibration
Ordering Information:
Buy Now
Part #
Description
Price
STR-T-Mike EM+
Ultrasonic Thickness Gage Kit
$2,000.00
Specifications:
Operating Principle:
Ultrasonic pulse-echo, and echo-to-echo measurement
Thickness Measurement Range:
0.025
inches to 19.999 inches - material and application dependent (0,635 mm to
508 mm)
Display Resolution:
0.001
up to 9.999 inches, 0.01 above
(0,01 up to 99,99 mm, 0,1 above)
Reading Stability:
Nominal measured value +/- 0.001 inch
Probe
Zero:
Performed automatically by measuring the transducer interface echo.
Operating Temperature:
-10°C
to +50°C (10°F to +120°F)
External Dimensions:
3.00
inches wide (76 mm)
5.75 inches long (146 mm)
1.35 inches deep (35 mm)
Measurement Rate:
4 Hz
(in normal thickness measurement mode) 25 Hz (in scan mode)
Display Update Rate:
4 Hz
Gain
Adjustment:
Selectable as AUTO, HI, MED, or LOW.
V-Path Correction:
Automatic, microprocessor controlled.
Power
Requirements:
Two
1.5V Alkaline batteries, size AA.
Storage Temperature:
-40°C
to +60°C (-40°F to +140°F) without batteries -20°C to +50°C (-4°F to +122°F)
with alkaline batteries (less than six months)
Weight:
10.6
ounces (300 grams) with batteries.
Warranty Terms:
All
thickness gauges have a full two year warranty on parts and labor excluding
batteries, transducers, and cables.
