|
Physical
Weight:
13.5 ounces (with batteries).
Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).
Operating
Temperature:
-14° to 140°F (-10° to 60°C).
Keyboard:
Membrane switch with twelve tactile keys.
Case:
Extruded aluminum body with nickel-plated aluminum end caps (gasket
sealed).
Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.
Display:
1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x
1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).
Ultrasonic Specifications
Measurement Modes:
Pulse-Echo (Precision General purpose).
Interface-Echo
(Precision - Thick materials).
Echo-Echo
(Precision - Thin materials & thru-paint).
Pulser:
Square wave pulser with adjustable pulse width (spike, thin, wide).
Receiver:
Manual or AGC gain control with 40dB range, depending on mode selected.
Timing:
40 MHz with ultra low power 8 bit digitizer.
Certification
Factory
calibration: traceable to national standards.
Warranty:
2 year limited
|
Power Source
Three 1.5V alkaline
or 1.2V NiCad AA cells.
Typically operates
for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
Auto power off if
idle 5 min.
Battery status
meter.
Measuring Range:
Interface-Echo
Mode: Steel 0.05 1.0 in (1.27mm - 25.4mm). Plastics from .005in.
(127mm).
Echo-Echo Mode:
Steel .006in -.500in (.15mm - 12.7mm).
Pulse-Echo
Contact: Steel .040in - 10.0in (1mm - 254mm). Plastics from .010in
(.254mm).
Echo-Echo Contact:
Steel thru-paint .100in - 3.0in (2.54mm - 76.2mm).
Resolution:
(selectable) +/- .001in (0.01 mm), or +/- .0001in - (.001mm).
Velocity Range:
.0492 to .3936 in./ms 1250 to 9999 meters/sec
Single and Two
point calibration option, or selection of basic material types.
Units: English &
Metric
Display
Display Views:
A-Scan Rectified
+/- (half wave view) RF (full waveform view)
B-Scan Time based
cross section view. Display speed of 15 secs per screen.
Large Digits
Standard thickness view. Digit Height: 0.400 in (10mm).
Scan Bar 6
readings per second. Viewable in B-Scan and Large Digit views.
Repeatability Bar
Graph Bar graph indicates stability of reading.
|
Data Logger (Internal)
12,000 readings and
waveforms (alpha numeric storage).
OBSTRUCT to
indicate inaccessible locations.
Memory: 16 megabit
non-volatile ram.
Transducer
Transducer Types:
Single Element (1
to 20 MHz).
Locking quick
disconnect “ 00” LEMO connector.
Standard 4 foot
cable.
Custom transducer
and cable lengths available.
Features
Setups: 16 factory
and 48 user-defined setups.
Gates: Single gate
in pulse-echo mode. Single gate with holdoff in interface-echo,
echo-echo, and plastics mode. Adjustable threshold.
Multiple
Measurement Modes:
Selectable modes for use with a variety of applications.
Alarm Mode: Set hi
and lo tolerances with audible beeper and visual LEDs.
Fast-Scan Mode:
Takes 32 readings per second and displays the minimum reading found when
the transducer is removed. Display continuously updates while scanning.
|
