|
Physical
Weight: 13.5 ounces
(with batteries).
Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).
Operating
Temperature:
-14° to 140°F (-10° to 60°C).
Keyboard:
Membrane switch with twelve tactile keys.
Case:
Extruded aluminum body with nickel-plated aluminum end caps (gasket
sealed).
Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.
Display:
1/8 in. VGA grayscale display
(240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).
Ultrasonic Specifications
Measurement Modes:
Pulse-Echo (flaws, pits)
Echo-Echo (thru-paint)
Pulser: Square
wave pulser with adjustable
pulse width (spike, thin, wide).
Receiver: Manual
or AGC gain control with
40dB range, depending on mode
selected.
Timing: 20 MHz
with ultra low power 8 bit digitizer.
Certification
Factory
calibration: traceable to national standards.
Warranty:
2 year limited |
Power Source
Three 1.5V alkaline
or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline and
100 hours on NiCad (charger not included.)
Auto power off if
idle 5 min.
Battery status
icon.
Measuring Range:
Pulse-Echo Mode:
(Pit&Flaw Detection) measures from 0.025 9.999 inches (0.63 to 254
millimeters).
Echo-Echo Mode:
Thru Paint & Coatings) measures from 0.1 to 4.0 inches (2.54 to 102
millimeters).
Range will vary +/- depending on the thickness of coating.
Resolution: +/-
.001 inches (0.01 mm)
Velocity Range:
.0492 to .3936 in./ms 1250 to 9999 meters/sec
Single and Two
point calibration option, or selection of basic material types.
Units: English &
Metric
Display
Display Views:
A-Scan Rectified
+/- (flaw view) RF (full waveform view)
B-Scan Cross
sectional view.
Display speed of 15 secs per screen.
Large Digits
Standard thickness
view. Digit Height: 0.400 in (10mm).
Scan Bar 6
readings per second. Viewable in B-Scan and Large Digit views.
Repeatability Bar
Graph Bar graph
indicates stability of reading. |
Data Logger (Internal)
12,000 pages of
memory (alpha numeric storage).
Page contents: 1
reading and 1 waveform per page.
OBSTRUCT to
indicate inaccessible locations.
Memory: 16 megabit
non-volatile ram.
Transducer
Transducer Types:
Dual Element (1 to 10 MHz).
Locking quick
disconnect “ 00” LEMO connectors.
Standard 4 foot
cable.
Custom transducers
and cable lengths available for special applications.
Features
Setups:
64 custom user-definable setups.
Factory setups can also be edited by the user.
Gates:
Single gate in pulse-echo mode, or single gate with holdoff in echo-echo
mode. Adjustable threshold.
Selectable
Transducers:
Selectable transducer types with built-in dual path error correction for
improved linearity.
Alarm Mode:
Set hi and lo tolerances with audible beeper and visual LEDs.
Fast-Scan Mode:
Takes 32 readings per second and displays the minimum reading found when
the transducer is removed. |
