Visit our new all-inclusive e-commerce store

ReliabilityDirectStore

All of the great products found here plus:

Bearing Maintenance Tools

Lubrication Equipment

Intrinsically Safe Products

and much more!

Your source for Extech test and measurement instrumentation

Copyright 1999-2007

Reliability Direct, Inc.

All Rights Reserved

TI-25M Series Ultrasonic Wall Thickness Gauges

The new CHECK-LINE TI-25M Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

The TI-25M can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25M probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

The TI-25M is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

Buy Now

Part #

Description

Price

ELE-TI-25M

General Purpose (0-350°F)

$1,495.00

ELE-TI-25M-MMX

Standard Through Paint to 1"

$1,950.00

ELE-TI-25M-H

High Temperature (0-650°F)

$1,595.00

ELE-TI-25M-107

Cast Iron / Plastics

$1,495.00

ELE-TI-25M-2120

Engine Blocks

$1,495.00

ELE-TI-25MPR8

Cylinder Wall / Engine Blocks

$1,795.00

ELE-TI-25M-HW

Heavy Wall

$1,495.00

Range*

0.025-6.00" (0.60-150.0 mm)

Resolution

.001" (0.01 mm)

Display

4½ - Digit, 0.5" Backlit LCD

Velocity Range

6,500-33,000 ft./sec (2000-10,000 m/sec.)

Probe

7.5 MHz, 0.25" Diameter (6.35 mm) with rubber molded grip.

Probe Wearface

PEEK (Polyethlethylketone)

Cable

4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).

Temp. Limits

Ambient: -20 to 120° F (-30 to 50° C)
Material: --ll0 to 200° F (-20 to 100° C)
Special high temperature probes are optionally available.

Battery Type

Two AA batteries

Battery Life

200 hours

Weight

7 ounces (196 g)

Size

2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm)

Accessories Included

Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.

Warranty

Gauge: 5 years
Probe: 90

Minimum radius for convex surfaces

0.350" (12.7 MM)

Minimum radius for concave surfaces

6" (63.5 mm)

Probe surface can be rounded to allow it to lie flat in small pipes to 1"

Minimum headroom

1" (25.0 mm)

Minimum sample diameter

0.150" (3.8 mm)