|
| |
|
TI-25LT Economical Ultrasonic
Wall Thickness Gauge |
|
The
new CHECK-LINE TI-25LT Basic Wall Thickness Gauge accurately measures wall
thickness and the extent-- from only one side!
Standard configuration: In its standard configuration, the TI-25LT is
factory set to measure steel only.
Optional configuration: As a "no cost" option, the TI-25LT can be
factory set to measure on another single material instead of steel. Please
advise what the material is at time of purchase as you may need to provide a
sample to ensure compatibility.
Easy upgrade to full TI-25M functionality (refer to separate data
sheet). TI-25M measures on all metals, ceramics, glass and most rigid
plastics. It provides Single Reading and Scan modes, where the probe is
dragged over a large measuring area. The minimum reading recorded during the
"scan" is displayed |
 |
Features:
-
Resolution of 0.004 inch
(0.04 mm)
-
Large, backlit LCD display
retains last reading
-
Simple operator controls
virtually eliminate training
-
Special-purpose probes are
offered for a variety of applications
-
Switch-selected units for
inches or mm
-
For underwater surveying,
probe cable lengths up to 50 feet are optionally available
-
The TI-25LT probe is
waterproof and can be submerged in water
-
The gauge is
impact-resistant and environmentally sealed to provide trouble-free
operation under the toughest field conditions
-
5 Year Warranty on Gauge
-
90 Day Warranty on Probe
-
NIST Certificate Include
|
| KIT:
Complete Kit includes: gauge, leather
pouch with hand strap, shoulder straps, combined sensor, sensor lead,
spare AA batteries, test block, operating instructions, calibration
certificate, couplant. |
 |
 |
Ordering Information:
|
Buy Now |
Part # |
Description |
Price |
|
|
ELE-TI-25LT |
Economical
Ultrasonic Wall Thickness Gauge |
$845.00 |
Accessories
Specifications:
|
Range* |
0.040-6.00" (1.00-150.0 mm)
Other ranges available with optional probes. |
Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes
are optionally available |
|
Resolution |
.004"
(0.04mm) |
Battery Type |
Two
AA batteries |
|
Display |
4½ -
Digit, 0.5" Backlit LCD |
Battery Life |
200
hours |
|
Velocity Range |
.0787-.3937 in/µs
(2000-10,000 m/sec) |
Weight |
710
ounces (280g) |
|
Probe |
1/4",
5 MHz,
actual wearface is 5/8" (17mm) |
Size |
2.5 x
4..5 x 1.25"
(64 x 114 x 32mm) |
|
Probe Wearface |
PEEK
(Polyethylethylkytone) |
Accessories
Included |
Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration
Certificate, 2 AA batteries, operating instructions, hard-plastic carrying
case. |
|
Cable |
4ft.
(1.2m) waterproof cable with non-polarized, quick-disconnect connectors.
Optional lengths up to 50ft. (15 meters) |
Warranty |
Gauge: 5 Years
Probes: 90 Days |
|
 |
Minimum radius for convex surfaces |
0.350" (12.7 MM) |
|
Minimum radius for concave surfaces |
6"
(63.5 mm) |
|
Probe
surface can be rounded to allow it to lie flat in small pipes to 1" |
|
 |
Minimum headroom |
1"
(25.0 mm) |
|
 |
Minimum sample diameter |
0.150" (3.8 mm) |
|
