|
| |
|
3000PRO Series
Ultrasonic Coating Thickness
Gauges |
|
 |
3 Models to choose from:
DCF 3000PRO Ferrous Only Model
DCN
3000PRO Non-Ferrous Only Model
DCFN 3000PRO Combination Ferrous & Non-Ferrous Model
The new Check-Line 3000PRO coating
thickness gauge is a multifunctional fully menu driven gauge for fast,
professional and precise coating thickness measurement for paint and
electroplated coatings on iron and steel.
The recording and further processing of
stored measurement data are just as easy to carry out as the measurement
itself. The file names can be alphanumerically assigned via an input panel
and managed in a data memory. |
|
Features:
|
Automatic identification of the substrate |
|
Calibration-free
measurements (calibration only in exceptional cases) |
|
Mobile
and stationary operation with only one gauge |
|
Highly
wear-resistant measuring poles made of carbide metal |
|
Special
probes for unusual measurement tasks |
|
Precise
measurements on different geometries thanks to simple
calibration methods |
|
Safe
use even for special applications such as sand-blasted
surfaces, small parts and curved surfaces |
|
Scan
mode for the quick recognition of coating thickness
variations on large surfaces, including display of minimum
and maximum readings |
|
Display
backlight for bad ambient lighting conditions |
|
|
Online
statistics with all statistical parameters |
|
Easy
to operate, well-known from mobile phones |
|
Intuitive
menu guidance via dialog with the user |
|
Free
choice of language – German, English, French |
|
Extensive
data memory for the management of different measurement
series |
|
Alphanumerical
file names can be individually stored for every measurement
task |
|
Infrared
interface for wireless data transfer to printer and PC |
|
No
additional data transfer software required thanks to the use
of Windows® standard application (HyperTerminal) |
|
|
| Complete Kit:
The 3000PRO Series is supplied as a
complete that includes the gauge, probe, manufacturers calibration
certificate, zero plate, 2 calibration foils, 2 AA batteries, soft
pouch, instruction manual all in a rugged plastic carrying case. |
 |
|
Specifications:
|
Measuring principle: |
Magnetic induction method |
|
Measuring range: |
0 ... 1500 µm/60 mils (selectable
units µm/mils) |
|
Tolerance: |
± (0.7 µm/0.04 mils + 1% of
reading) |
|
Resolution: |
0.1 µm/0.004 mils or < 0.2 % of
reading |
|
Display: |
4-digit display (digit height 10
mm/0.4”) and 32 alphanumerical characters; switchable backlight |
|
Minimum measurement area: |
5 mm x 5mm/0.2” x 0.2” |
|
Minimum curvature radius: |
convex 2mm/0.08”; concave
5mm/0.2” |
|
Minimum substrate thickness: |
0.2mm/8 mils |
|
Calibration methods: |
- Factory calibration: no
calibration required for standard applications
- Zeroing (1-point calibration): measurements on small
geometries
- Zeroing and foil calibration (2-point calibration): increased
measuring accuracy
- Two-foil calibration: especially for rough, sand-blasted
surfaces
- CTC: calibration on coated object if zeroing is not possible
- Zero offset: addition/subtraction of a constant value to/from
the reading |
|
Limit values: |
Selectable; optical and acoustic
signal if limit value is exceeded |
|
Scan mode: |
For continuous measurements; for
the quick recognition of coating thickness variations; with
permanent display of minimum and maximum reading |
|
Statistics: |
Single-value statistics: n,
average x, s, kvar, min, max, cp, cpk from max. 10,000 readings
Block-value statistics: n, average x , average s, average kvar ,
min, max, cp, cpk; block size 3 to 100 readings |
|
Data memory: |
10,000 readings in max. 500
selectable files; alphanumerical file names; stored readings and
statistical values individually recallable |
|
Interfaces: |
Infrared and serial RS232
interface |
|
Language: |
Operator prompting and
documentation in German, English, French (optional other
languages) |
|
Operating temperature: |
0 °C to 50 °C/32 °F to 122 °F
(storage temperature - 20 °C to +60 °C/-4 °F to 140 °F) |
|
Surface temperature: |
-15 °C to 60 °C/5 °F to 140 °F
(briefly above 60 °C/140 °F up to 150 °C/302 °F) |
|
Power supply: |
2 x round cell (AA) 1.5 V up to 60
hours of operating time |
|
Housing/keypad: |
Protection class IP52 (protection
against dust and dripping water) |
|
Dimensions: |
Gauge: 140 mm x 62 mm x 30mm/5.6”
x 2.5” x 1.2” (HxWxD)
Probe: dia. 14 mm x 83mm/dia. 0.56” x 3.3” |
|
Weight: |
approx. 200 g/7 oz (gauge
including batteries and probe) |
|
Standards: |
DIN EN ISO, ASTM, BS |
|
Ordering Information:
|
Buy Now |
Part # |
Description |
Price |
|
ELE-DCF-3000PRO |
Ferrous only Basic model |
$1,350.00 |
|
CALL |
ELE-DCN-3000PRO |
Non-Ferrous only Memory model |
$1,350.00 |
|
CALL |
ELE-DCFN-3000PRO |
Combination Ferrous & Non-Ferrous model |
$1,695.00 |
|
CALL |
ELE-3000-IRP |
Infrared Printer, 16 lines per second |
$595.00 |
|
CALL |
ELE-ASB-232 |
USB to Serial Adaptor |
$50.00 |
Accessories
|
