|
| |
|
Danatronics EHC-09 Series
Ultrasonic Thickness Gauges |
|
Can Your Ultrasonic Thickness Gauge
Do This?
-
Vibrate the Gauge on Alarm
-
Illuminate the Keypad on Alarm
-
Inform you when to replace the transducer
-
Lefty/Righty user programmable graphical disply
|
  |
|
|
The EHC Series is available in Three models:
EHC-09B: A basic gauge designed to make
reliable, accurate readings on mostly steel structures from just one side.
Packaged in the same custom molded high density plastic case with rubber
keypad as our more sophisticated models, the gauge offers a simper user
interface and can be used with all of the transducers of the ECH gauge
series. The unit is easily upgraded in the field to the ECH-09 mid-range and
ECH-09L high-range models.
$1,195.00 |
|
EHC-09: A
mid-range model combining the most commonly utilized features in a thickness
gage not requiring a data logger. You can increase or decrease the gain,
vibrate and illuminate the keypad on alarm conditions, and the Transducer
Attendant informs you when to replace the transducer. The unit is easily
upgraded in the field to the EHC-09L Datalogger model.
$1,795.00 |
EHC-09L: Our
top of the line model offering all the same features of the EHC-09 plus our
flexible Datalogger, B-Scan and Echo to Echo. It also includes a custom
molded pouch with belt clip and elastic strap to easily hold the unit in
either the left or right hand. $2,295.00 |
EHC-09 Model Comparison Chart:
|
Item |
Specification |
EHC-09L |
ECH-09 |
ECH-09B |
|
Thickness Range: |
0.008-20.000 inches (0.20mm-508mm) |
X |
X |
X |
|
Delay line zero measurement: |
Auto at power up with listed numeric
value. Ideal for correcting delay line wear/curvature and for transducer
acoustic drift at elevated temperatures |
X |
X |
X |
|
Scan Mode: |
Displays a Min or Max thickness value at
20 measurements per second. |
X |
X |
X |
|
Hold Mode: |
Holds display to retain last reading with
reverse video display |
X |
X |
X |
|
Freeze Mode: |
Freezes Display |
X |
X |
X |
|
Units: |
Inches / Millimeters / Microseconds |
X |
X |
X |
|
Gain: |
Low, Standard or High for varying test
conditions |
X |
X |
|
|
Differential Mode: |
Displays the difference from the actual
thickness measurement and a user entered reference value |
X |
X |
|
|
Alarms: |
Min/Max/Depth, vibralarm, beeps and
display flashes as well as keypad illumination and vibration |
X |
X |
|
|
Illuminating keypad: |
F1=Red, F2=Yellow, F3=Green for easy,
go/no-go testing |
X |
X |
|
|
Automatic probe wear indicator: |
Automatically informs the operator to
replace the transducer |
X |
|
|
|
Echo to Echo |
Measures the metal thickness only (thru
paint and coatings |
X |
|
|
|
Non Encoded B-Scan |
Displays a cross section of the test piece |
X |
|
|
|
Data Logger |
Data Logger capability |
X |
|
|
|
Carrying Pouch |
Custom molded with belt clip and elastic
strap |
X |
|
|
All Software options are field
upgradeable, no need to return the unit to the factory!
|
EHC-09 shown with protective
pouch, 5 step test block, transducers and couplant.
|
EHC-09 series is
available in a wide variety of dual and single element transducers to
meet your challenging thickness gauging needs |
Ordering Information:
|
Buy Now |
Part # |
Description |
Price |
|
DAN-EHC-09B |
|
$1,195.00 |
|
|
DAN-EHC-09 |
|
$1,795.00 |
|
|
DAN-EHC-09L |
|
$2,295.00 |
Accessories
|
Buy Now |
Part # |
Description |
Price |
|
|
DAN-PP-09 |
Carrying pouch with waist clip |
$75.00 |
|
|
DAN-WS-09 |
Wrist strap |
$20.00 |
|
|
DAN-USB-09-6 |
USB Cable, 6' |
$45.00 |
Specifications:
|
Range* |
0.050
- 20.000" (.20 - 508.0 mm) |
|
Resolution |
.001"
(0.1 mm) |
|
Display |
128 x 64 Graphics LCD Monochrome |
|
Units |
English/Metric/Microseconds |
|
Information Displays |
LOS, Min, Max, large reading while displaying
min at same time, velocity, zero, calibration, units, freeze, unfreeze, %
battery life remaining, gain - low, std, high, echo to echo symbol |
|
Backlight |
Light Emitting Diode, On/Off or Auto On based
on valid readings or last key press. |
|
Illuminated Keypad |
F1 = Red, F2 = yellow, F3 = Green for easy
go/no-go testing (Patent Pending) |
|
Material Velocity Calibration Range |
0.0200 - 0.7362 in/µS (0.508 - 18.699 mm/µS) |
|
Measurement rate |
4/sec or 20/sec in
fast mode |
|
Bandwidth |
0.5 - 20 MHz (-3 dB) |
|
Differential Mode |
Displays the difference from the actual
thickness measurement and a user entered reference value |
|
Scan Mode |
Min/Max thickness value at 20 measurements per
second (ideal for high temperature thickness readings and tracking the
minimum depth alarm). |
|
Freeze Mode |
Freezes Display |
|
Hold Mode |
Holds display to retain last thickness reading
in reverse video display |
|
Alarms |
Min/Max depth, vibralarm, beeps and display
flashes as well as keypad illumination |
|
Shut Off |
Auto, time out (after X minutes user
programmable after no reading, loss or no key press) |
|
Probe |
5
MHz, .375" diameter |
|
Probe recognition |
Via pick list from the menu |
|
Automatic probe wear indicator |
"Transducer Attendant" - Automatically informs
the operator to replace the transducer (Patent Pending) |
|
Delay line zero measurement |
Auto at power up with listed numeric value.
Ideal for correcting delay line wear/curvature and for transducer acoustic
drift at elevated temperatures |
|
Minimum Pipe Size |
1"
nominal (30mm) steel pipe |
|
Temp. Limits |
Ambient: -4 to 122° F (-20 to 50° C)
Material: --5
to 1000° F (-20 to 537° C) - depends upon probe |
|
Calibration Plate |
0.250" (6.35mm) steel plate, built into the front of the housing |
|
Battery Type |
Two
AA batteries |
|
Battery Life |
200
hours |
|
Weight |
Gauge: 8 ounces (0.23 kg) |
|
Size |
5.0"
x 3.0" x 1.25"
(127 x 76.2 x 31.75 mm) |
|
Warranty |
Limited 2 year warranty on parts and labor |
|
Kit includes |
EHC
09 Series Gauge, DZ-537 potted, 5 MHz 0.375" diameter probe, cable,
operations manual, couplant |
* Depending on material, temperature and
transducer selection.
|
