|
| |
|
SKF TMTI 300 Thermal Imager |
|
The TMTI 300 is a handheld thermal imaging
instrument that aids condition monitoring of electrical and mechanical
machinery while it is running. The tool will interest companies in the
electrical, HVAC, automotive, food and drink manufacturing industries and in
R&D, that have previously found the cost of thermal imaging prohibitive.
The TMTI 300 assists
maintenance staff in reducing downtime by evaluating the condition of
running machinery. By producing visible images from invisible radiation, the
tool allows the user to view a wide range of temperatures for safe
inspection of all kinds of mechanical and electrical machines. |
|
Features:
-
Easy-to-use, light weight, one or two
handed operation allows the TMTI 300 to be flexible and used for
most industrial applications
-
Non-contact measurement technique enables
measurements to be made safely on running equipment
-
Large thermal image storage capacity,
1000 images per Mb can be stored on Pocket PC/storage card. Easy for
data collection and subsequent reporting
-
Two user defined spot temperature
measurement points allow comparison of areas of interest. The
temperature difference of the 2 spots is displayed as a separate
value
-
Both PC and “Pocket PC” compatible
allowing flexibility in viewing results and report writing
-
Software included for ease of data
analysis
-
Laser pointer shows the size of a pixel,
allowing the area of interest to be pinpointed and for accurate
temperature measurement
-
Convenient temperature measurement in K,
°C and °F eliminates the necessity to convert temperature reading
-
3 different selectable color pallets
(green/blue, red/blue, grayscale) for ease of viewing
-
Tripod mounting thread for stability and
stable monitoring over a period of time
-
Sturdy “ready use” carrying case. The
imager, pistol grip and pocket PC can be stored as one assembly
ready for use.
-
Ideal complement to other condition
monitoring techniques, such as vibration analysis
|
|
The TMTI 300 is used to show a difference
in temperature between two running bearings. This temperature difference
could indicate a potential bearing problem that could lead to a failure
and downtime. |
|
The TMTI 300 is used to
inspect cable connections. The temperature of one of the cable
connections is significantly higher than the others. This could indicate
potential problems and should be further investigated.
A Pocket PC is required in order to view images. This must be obtained
separately. |
Ordering Information:
|
Buy Now |
Part # |
Description |
Price |
|
SKF-TMTI 300 |
Thermal Imaging Instrument
(Pocket PC is NOT included) |
$4,520.00 |
|
Technical data |
|
 |
|
Designation |
TMTI 300 |
|
Performance |
|
|
Temperature measurement |
Range -10 to 300 °C (14 to 572 °F) |
|
Field of view (FOV) |
20° x 20° |
|
Spectral response |
8 to 14 µm |
|
Sensitivity |
~0.3 K @ 30 °C (@ 102.2 °F) |
|
Displayed image |
96 x 96 pixels on Pocket PC. |
|
|
128 x 128 pixels on PC |
|
Detector |
16 x 16 pixel array |
|
Frame rate: |
8 Hz |
|
Range |
0.7m - infinity (2.29 ft - infinity) |
|
Image storage |
Up to 1000 images per Mb of Memory. |
|
Laser Pointer |
Class II laser |
|
Imager power supply |
|
|
Battery |
4 x AA (LR6) alkaline batteries |
|
Operation time |
Up to 8 hours |
|
AC operation |
AC adaptor (supplied) |
|
Mechanical |
|
|
Housing |
Impact resistant plastic |
|
Dimensions |
120x125x80 mm (3.72x4.92x3.1 in) |
|
Weight
|
<600g (21.16 oz) not including
'Pocket PC' and handle |
|
Mounting: |
Handheld & tripod mounting |
|
Environment |
|
|
Temp. operating range |
-5 to 50 °C (23 to 122 °F) |
|
Humidity |
10% to 90% non condensing |
|
Temp. storage range |
-20 to 80 °C (-4 to 176 °F) |
|
CE mark (Europe)
|
EMC DIRECTIVE 89/336/EEC as outlined
in harmonized norm for Emission EN 50081-1,
EN 55011 (B) Immunity EN 50082-2,
EN 61000-4-2, -3, level 3. |
|
IP |
40 |
|
Laser conformance |
USA 21, CFR 1040.10 |
|
Included accessories |
|
|
|
Imager & handle |
|
|
Software for 'Pocket PC' & PC |
|
|
iPaq type synchronization cable |
|
|
2m RS232 connection cable - imager to PC |
|
|
User manual |
|
|
AC power supply |
|
|
Tool case |
|
Computer requirements |
|
|
Pocket PC
|
Compatible with most 'Pocket PC'
devices running Microsoft 'Pocket PC'
2000, 2002 and 2003 |
|
|
RS 232 to 'Pocket PC' communication
cable or CompactFlash RS 232 adaptor
where applicable. |
|
PC
|
IBM compatible PC with a minimum of:
32Mb RAM, 300MHz processor,
MS Windows (2000 and XP),
RS 232 serial port (115k Baud),
16 bit color graphics capability |
|
