|
Throughout both of these test cycles the visual display (which includes a
green/red grading indicator and a 0-100 numerical readout) will flash
continuously. This will stop when the test is complete and the test result
will remain on the display screen until the next test is carried out.
Through its comparative operation OilCheck
is able to show changes in oil condition affected by water content, fuel
contamination, metallic content and oxidation, to within a typical
repeatability factor of better then five per cent. These results in turn
provide an indication of the loss of lubricating properties of the oil and
also of and mechanical wear in the equipment in which the oil is used.
The
TMEH 1 is a compact (250mm x 95mm x
32mm) unit that will last for more than 150 hours or 3,000 tests on one 9V
alkaline battery. |
Datasheet 
