|
| |
|
HardCHECKER Hardness Tester |
|
All Kits Include: 2 AAA Alkaline
Batteries, 13.5mm and 20mm Probe Shoes, Test Block, Plastic Carrrying
Case, Cleaning Brush, Operation Manual, Operation Card, Certificate of
Calibration. One Year limited warranty against defective parts and
labor.
-
Meets ASTM Standards
A956-00 (Leeb Hardness Testing of Steel Products)
-
Operation based on LEEB
rebound principle
-
Easy two key operation
-
Hardness measurement
independent of test direction
-
Direct digital read-out of
hardness value on large LCD display
-
Display of single or
average value
-
Conversion table for nine
materials: steel, tool steel, stainless steel, gray cast
iron, nodular iron, aluminum, brass, bronze, and copper
alloys
-
Hardness conversion scales
for HL, HV, HB, HS, HRB, HRC, and N/mm²
-
One Year warranty
|
|
|
Measurement Conversion Range:
|
Leeb: |
150 to 1000 HL |
|
Brinell: |
75 to 700 HB |
|
Rockwell C: |
20 to 70 HRC |
|
Rockwell B: |
35 to 100 HRB |
|
Vickers: |
75 to 1000 HV |
|
Shore: |
30 to 100 HS |
|
Tensile Strength: |
250 to 2000 N/mm² |
|
|
Specifications:
|
Display Resolution
|
1 HL, 1 HB, 1 HV, 0.1 HRC, 0.1 HRB,
5/Nmm² |
|
Power Supply |
2 AAA alkaline batteries |
|
Battery Life |
4000 measurements |
|
Dimensions |
diameter x length: 1.5 x 6.7 in /
38 x 170mm |
|
Weight
Shipping Weight |
7 ounces / 200g
10 lbs (including test block) |
|
Impact Indenter |
Tungsten-carbide ball (3mm
diameter) |
|
|
|
STR-062-035-330 HardCHECKER Rebound
Hardness Tester Kit |
$3,055.00 |
|
|
|
|
|
|
Spare Parts: |
|
|
|
STR-081-035-371 Test Block |
$530.00 |
|
|
STR-081-034-443 Replacement Impact Body |
$615.00 |
|
|
STR-081-034-312 Probe Shoe - 20 mm |
$110.00 |
|
|
STR-081-034-656 Probe Shoe - 13.5 mm |
$105.00 |
|
|
STR-081-034-536 Cylindrical Probe Rings
- Set of Five |
$555.00 |
|
|
STR-081-034-539 Spherical Probe Rings |
$345.00 |
|
