|
| |
|
SKF TMEA 2 Laser Shaft Alignment
Tool |
|
Easy, quick and affordable shaft
alignment
The TMEA 2 is the latest addition to SKF's
range of shaft alignment tools. The two measuring units can be easily
attached to the shafts using magnetic brackets or chains. Each measuring
unit emits a laser line, which is projected on the detector of the other
unit.
-
Display unit simultaneously provides
clear "real-time" coupling and feet values during alignment process
making rechecking of the alignment unnecessary
-
Laser and scale lines for easy detection
of the nature of misalignment
-
"Soft foot" feature is shown on the
digital display, which easily guides the operator through this
function
-
Display unit can be held using one hand,
freeing the operator to perform the alignment
-
Magnetic brackets allow easy fixture of
the measuring units onto the shaft
-
A set of blank alignment reports to help
you keep record of your alignment jobs
-
Maximum distance of 0.85 m (2.8 ft)
between the measuring units
User friendly, three-step process;
measure-align-document, no training required:
The pre-set machine dimension values
facilitate quick data input
|
|
Display unit simultaneously
provides clear "real-time" coupling and feet values during
alignment process making rechecking of the alignment unnecessary |
 |
|
|
|
|
"Soft foot" feature is shown on
the digital display, which easily guides the operator through
this function |
 |
|
|
|
|
Compact, ergonomically design
display unit: |
|
|
|
Display unit can be held using one
hand, freeing the operator to perform the alignment |
 |
|
|
|
|
Only four buttons for operation,
which simplifies the display unit |
 |
|
|
|
|
Magnetic brackets allow easy
fixture of the measuring units onto the shaft |
 |
|
|
1. |
Laser and scale lines for easy
detection of the nature of misalignment |
 |
|
2. |
Spirit levels allow easy
positioning of the measuring units |
|
3. |
Magnetic brackets, also suitable
for chain connection |
|
4. |
"Quick lock screw" for easy and
fast tightening in different heights of the measuring units |
|
5. |
Accurately finished steel rod for
maximum stability (available in differents lenghts) |
|
6. |
Wheel for vertical fine laser line
adjustment |
Ordering Information:
|
Buy Now |
Part # |
Description |
Price |
|
SKF-TMEA2 |
Laser Shaft Alignment Kit |
$4,265.33 |
Specifications:
|
Measuring units: |
|
Type of laser |
Diode laser |
|
Laser wave length |
670 - 675 nm |
|
Laser class |
2 |
|
Maximum laser power |
1 mW |
|
Maximum distance between
measuring units |
0,850 m (2.8 ft) |
|
Type of detectors |
Single axis PSD, 8.5 x 0.9 mm (0.3 x .04
in) |
|
Fixture |
Magnetic and/or chain |
|
Display unit: |
|
Battery type |
2 x 1,5V LR14 Alkaline |
|
Operating time |
20 hours continuous operation |
|
Displayed resolution |
0,01 mm (0.1 mil in "inch" setting)
|
|
Complete system: |
|
Content |
Display unit
2 measuring units with spirit levels
2 magnetic / mechanical shaft fixtures
2 locking chains
5 sets of shims
Measuring tape
Instructions for use
Certificate of calibration
Set of alignment reports
Carrying case |
|
Shaft diameter range |
Magnetic: 30 - 500 mm (1.2 - 20 in)
Chain: 30 - 150 mm (1.2 - 5.9 in)
Optional chain: 150 - 500 mm (5.9 - 20 in) |
|
Accuracy of system |
Better than 2% |
|
Ex classification |
- |
|
Ex certificate number |
- |
|
Temperature range |
0 - 40°C (32 - 104°F) |
|
Operating humidity |
< 90 % |
|
Carrying case dimensions |
390 x 340 x 95 mm (15.4 x 13.4 x 3.7 in)
|
|
Total weight (incl. Case) |
3.7 kg (8.1 lb) |
|
Calibration certificate |
Valid for two years |
|
Warranty |
12 months |
|
Printing capability |
No |
|
