|
| |
|
Easy Laser D550 Extreme Alignment System
Certified for use in
Hazardous Areas! |
|
Easy-Laser Extreme – is
ATEX approved and one of the toughest and most robust shaft
alignment systems on the market, with parts made of
stainless steel and hard anodized aluminum. Designed for
those who work in demanding environments, where precision,
reliability and user-friendliness are of the utmost
importance. Easy-Laser Extreme is intrinsically safe and
ATEX approved for use in explosive areas. The Easy-Laser
Extreme shaft alignment system is designed for the most
demanding type of applications and environments, and comes
with a 4 year warranty.
ATEX Approved:
ATEX approved Easy-Laser
Extreme shaft alignment system is intrinsically safe and is
approved according to the latest ATEX directive for use in
potentially explosive environments, for example, chemical,
petrochemical, oil/gas, refinery and pharmaceutical
industries.
EX certificate number: Nemko
06ATEX1051X
|
|
 |
|
Easy-Laser Extreme shaft
alignment system is waterproof, dustproof and
impact-protected. The system has been tested and approved in
accordance with Ingress Protection Rating System IP67, which
means that the system is dustproof and waterproof to a depth
of 1 meter.
|
|
 |
|
 Datasheet
 |
|
Complete System Includes the
Following:
- 1 Display unit D336 with 13
measurement programs
- 2 Cables with Push/Pull
connectors - 2 Meter Lengths
- 2 Extra cables with Push/Pull
connectors - 2 and 5 Meter Lengths
- 2 Measurement units (S, M)
- Pre-mounted with the rods
on the shaft brackets for rapid machine set-up
- 2 Shaft brackets with chains
- 2 Extension chains
- 8 Rods
- 1 Manual
- 1 Measuring tape
- 2 Sets of batteries for
display unit
- 1 EasyLink Windows program
plus PC cable and USB adapter
- Strong aluminum case, approved
for EX environments
|
|
Longest Guarantee on the Market
and Free Calibration:
Damalini AB’s quality system is
approved by Nemko AS, the Norwegian Testing and Certifying
Institute. This guarantees top product quality. Therefore we
dare to offer what is probably the longest guarantee period on
the market, 4 years, on our Easy-Laser Extreme systems.
Easy-Laser Extreme comes with one
free calibration within two years of purchase.
Simple to use Measurement Programs:
The key to quick and easy
measurements is a measurement program that helps you achieve
your best. We have therefore included a large number of
measurement programs in the display unit as standard. All
measurement programs guide the user through the entire
measurement process step by step. So you can leave most of the
thinking and all the difficult calculations to the measurement
system.
|
|
 |
Horizontal 9-12-3
- For the alignment of horizontal machines by the 9-12-3 method. |
|
 |
Soft Foot - With
this program you check so that the machine is resting on all feet.
Shows which foot should be corrected (if necessary) |
|
 |
EasyTurnTM
- For the alignment of horizontal machines. Allows complete
measurement with only 40" rotation of the shafts. |
|
 |
Cardan - Shows
the angular errors and adjustment value on cardan-shaft-coupled/center-offset
machines. (Requires accessory fixtures.) |
|
 |
Vertical - For
measurement of vertical and flange mounted machines. |
|
 |
RefLockTM
- Any pair of feet can be locked/set as a reference. This is a
sub-function in the machine train program. |
|
 |
Offset and Angle
- Shows center offset and angular error between two shafts, for
example. Also suitable for dynamic measurements. |
|
 |
Values - Shows
live readings from S- and M-unit. Can be used for shaft alignment,
straightness measurement and dynamic measurement. Up to four
detectors can be connected in series and be zeroed individually. |
|
 |
Straightness -
For straightness measurement of (for example) machine foundations,
shafts, bearing journals, machine tools, etc. Can handle up to 150
measuring points with two zero points. |
|
|
Tolerance Check - Checks the
readings for offset and angle against the selected tolerance.
Graphic representation on screen when the alignment is within
tolerance values. Sub-function |
|
 |
Machine Train - For the
alignment of two to ten machines in a row (nine couplings). The
entire alignment can be followed live on the screen. |
|
 |
Thermal Growth Compensation -
Compensates for difference in thermal growth between machines. This
is a sub-program in the machine train program. |
|
The measurement results
Offset and angular misalignment values are shown on the
display, now you know if you are within the recommended tolerance. Plus
the shim and horizontal corrections are given at the same time. Choose
between "live" horizontal or vertical and watch your moves in real time
making it easy to position the machine. Send the measurement results to
a portable printer or store the information for PC interface and
reporting.
No black magic
Shaft alignment with Easy-Laser is no hocus-pocus. Even
if the technique inside the shell is rather advanced, the principle of
measurement is easy. It is based on the reverse indicator method.
|
 |
-
Offset
value.
-
Angular
value.
-
Shim/Adjustment values. Live direction indicated by filled machine
feet symbols.
-
Tolerance settings display. Select speed range (1 of 5).
-
Filled
coupling symbols indicating that alignment is within tolerance.
|
 |
|
|
Transfer Measurement
Data to PC:
With the EasyLink™
program for Windows® (included), you can produce
professional reports using both measurement data and
pictures and export to spreadsheets such as Excel®,
etc. Connection is via RS232 or USB.
Print Your measurement Results:
If you want to
document the alignment without using a PC, just
connect up a printer and print out all measurement
data.
Save Your Results in the Display Unit:
The keyboard with all
characters accessible makes it simple to give each
measurement a unique description. The system then
adds the time and date of the measurement. Up to
1,000 shaft alignments can be saved.
|
|
|
Ordering Information:
|
Buy Now |
Part # |
Description |
Price |
|
DAM-D550 |
Extreme Laser Alignment System |
$14,950.00 |
|
