|
| |
|
Easy-Laser™D200 BTA
Digital
|
|
With the Easy-Laser ® BTA digital there finally is the possibility to
document the alignment of a sheave/pulley alignment. Make a printout, store
data in the display unit or transfer data to a PC.
-
Shows the parallel and angular misalignment of the
sheaves, both digitally and graphically in real time
-
Calculates both shim- and adjustment values
-
Documentation to printer or PC via RS232-interface
-
Up to 1000 measurements can be stored
-
Much faster and more accurate than measuring with other,
conventional methods
-
For both horizontal and vertical mounted machines
-
Magnetic attachment means that the alignment can be made
by one operator
|
|
Maintenance are
savings
In the industry of
today, preventive and predictive maintenance is a matter of course. When
aligning with the Easy-Laser® BTA you reduce the wear on sheaves, belts,
bearings and sealings and reduce vibrations. This will give you less
downtime, which of course means that you increase the available machine
time. Time that guarantees your income. Increased efficiency also means
large energy cost savings.
Document the
result
For years the
possibility to document the result of an alignment of e.g. a pump and a
motor has been standard. With the Easy-Laser®
BTA digital
there now is the possibility also to document
the alignment of a belt transmission alignment, which stands up to
the demands one can have of a modern measurement system.
Easy for the user
The tool is attached
in a few seconds, and you are lead step-by-step on the screen through the
alignment procedure. The adjustment of the machine are displayed in live on
the screen with values for angular and axial offset in both longitudinal (X)
and transversal (Y) direction plus adjustment values for rear or front feet.
The result is a fast, precise alignment. After finished measurement you can
easily store, print or transfer the measurement data to a PC.
New possibilities
With our new
SpinLaser Technology™ using rotating laser a whole new world of
possibilities for the measurement and alignment work are made available.
E.g. the Easy-Laser® BTA digital can also be used for dynamic
measurements, parallel measurements of planes and shafts etc. The system
reads two or more detectors at the same time "live", which gives you a
direct feedback of your work. This will result in a faster and easier
alignment than before.
|
|
Step-by-step on the screen
1 . Enter which machine is the
adjustable (M).
2 . Enter the distance between the feet.
3 . Enter the face width for the
M-sheave and the S-sheave.
The system now automatically
compensates for the difference. |
4.
Place the detector unit vertically according to the display. Record the value
5.
Place the detector unit horizontally according to the display. Record
the value
6.
The display now shows in live the
measurement and adjust-/shim values in both vertical and horizontal
direction, which makes the alignment really easy. You can now store, print
or transfer the measurement data to a PC.
|
|
 |
 |
 |
 |
|
V-Belts |
Timing Belts |
Flat Belts |
Chain Drives |
Ordering Information:
|
Buy Now |
Part # |
Description |
Price |
|
DAM-D200 |
BTA Digital Laser Belt Alignment
System |
$8,550.00 |
|
|
DAM-02-0341 |
110V Portable Thermal
Printer |
$470.00 |
|
|
DAM-03-0032 |
220V Portable Thermal
Printer |
$470.00 |
Specifications:
|
Laser
Transmitter: |
|
Sheave diameters |
Ø
60 mm [2.5"] and larger |
|
Sheave thickness |
Not
depending on sheave thickness |
|
Laser aperture |
180° |
|
Measurement distance |
10
m [33 feet] radial |
|
Battery type |
1xR14 |
|
Battery operation |
4
hours continuously |
|
Laser class |
2 |
|
Environment protection |
IP65 |
|
Output power |
<1
mW |
|
Laser wavelength |
635–670 nm |
|
Housing material |
Anodized aluminum |
|
Dimensions |
WxHxD: 300x60x65 mm [12"x2 3/8"x2 1/2"] |
|
Weight |
1.3
kg [43 oz] |
|
Detector unit: |
|
Measurement range |
15
mm [5/8"] |
|
Housing material |
Anodized aluminum |
|
Dimensions |
WxHxD: 250x50x65 mm [10"x2"x2 1/2"] |
|
Weight |
600
g [21 oz] |
|
Display unit: |
|
Housing material |
Anodized aluminum |
|
Type of display |
Backlit dot matrix LCD |
|
Displayed resolution |
Axial offset 0.1 mm [5 mils]
Angular value 0.01°/ 0.17 mm/m [0.5 mils/inch]
Shim value 0.1 mm [5 mils] |
|
Batteries |
4
pcs. 1.5 V R14 (C) |
|
Operating time |
48
hours |
|
Output port
|
RS232 for PC and printer communication |
|
Keyboard |
Membrane alphanumeric multi function |
|
Memory |
Storage for 1000 alignments |
|
Data transfer PC-program |
EasyLink™ for Windows® |
|
Dimensions |
WxHxD: 175x170x40 mm [7"x6 3/4"x1 1/2"] |
|
Weight |
1250 g [2.7 lbs] |
|
Accessories: |
|
Portable thermal printer incl. cable and charger |
|
